Solid State Damper Positioner Kit

LEAKY DAMPERS! A Major Energy Waster

When it’s real hot or real cold, it’s essential to keep unwanted, untreated air from entering the building. New low leakage dampers are the best answer. When that’s not possible, give your old dampers new efficiency with…

Pneuline Low Leakage Damper Blade Gaskets

Special formula polyethylene molded gaskets. Simply slip over the edge of the blade – it holds firmly. Standard eight (8') foot lengths cut to size easily.

Part # Damper Blade Gasket Price  
DG101 8' Polyethylene Damper Gasket $7.04 Add to Order

Solid-State Damper Positioner Kit

Made of durable red clay. Simply place under the bottom damper blade for convenient outdoor air minimum positioning.


ORDERING INFORMATION
ORDER # DESCRIPTION
BRICK 1 10% O.A. Positioner
BRICK 2 20% O.A. Positioner

Damper Accessories

DAMPER ARM
PUSHROD
5/16" diameter pushrod available in various lengths.
BALLJOINT
Straight type balljoint used for connecting drive arms to push rods. For 5/16" push rods.
DAMPER BLADE BRACKET Attached to damper blade for connection to linkage.

Part # Damper Accessories Function Price  
AB125 Damper Blade Bracket - $26.00 Add to Order
BJ516 Balljoint - $2.90 Add to Order
DA012 Damper Arm for 1/2" Shaft - $5.80 Add to Order
DA716 Damper Arm for 7/16" Shaft - $95.06 Add to Order
DMPR-KC003 7" Pin Extension Extends Length of the Blade Drive Pin $52.13 Add to Order
DMPR-KC100 Blade-to Blade Linkage Kit Drives 2 Vertically Coupled Dampers $117.29 Add to Order
DMPR-KC101 External Pin-to-Pin Linkage Kit Drives Two Vertically Coup;led Dampers $132.29 Add to Order
DMPR-KC150 Blade-to-Blade Bracket Kit Couples 1-NO and 1-NC Damper Joined Side-By Side $105.06 Add to Order
DMPR-KC151 Blade-to-Blade Bracket Kit Couples 2 Horizontally Joined Dampers $80.04 Add to Order
DMPR-KC152 90 Deg Blade-to-Blade Linkage Kit Drives 2 Dampers Joined at a 900 Angle $153.80 Add to Order
DMPR-KC211 2 Damper Jackshaft Kit Connects 2 Dampers to the Same Actuator $370.27 Add to Order
DMPR-KC212 3 Damper Jackshaft Kit Connects 3 Dampers to the Same Actuator $529.99 Add to Order
DMPR-KC250 Manual Quadrant To Manually Operate Dampers $57.34 Add to Order
PR24 24" Pushrod - $5.00 Add to Order
PR48 48" Pushrod - $7.50 Add to Order