Browse by category

Barber Colman-Schneider Electric Actuators

Barber-Colman/Schneider Electric Light Duty "Beercan" Electric Actuators

Beercan ActuatorNECC offers Barber-Colman's complete line of compact, light duty round actuators. Those who rely on them regularly have nicknamed them “Beercan” actuators, due to their extraordinary shape. Selection depends upon the necessary control signal, torque and options to suit your application. All have spring return and are available with or without auxiliary switches and positive positioners. These valve actuators fit on Barber-Colman valves only.

Use the AM-601 damper linkage and the Order # in column 2.

For high temperature applications (steam or very hot water), use the AV-601 valve linkage extension.

Barber-Colman Schneider Electric Round "Beercan" Actuator Accessories

When applying one of the "beercan" electric actuators above as a damper actuator, they must be ordered with the damper linkage if it’s for something other then direct replacement. For high temperature applications (steam or very hot water), use the AV-601 Valve Linkage Extension.

Part # Description  
AM-111 5/16" Crankarm Call... Add to Order
AM-115 7/16" Crankarm Call... Add to Order
TOOL-019 Spring Tool Call... Add to Order

Schneider Electric DuraDrive™ Electric Actuators

Schneider Electric DuraDrive Electric Actuators

Barber-Colman DuraDrive™ electric actuators are built for the long haul! Designed to mount directly to damper shafts, they can also be mounted to valves utilizing the appropriate linkages.

* Internal Power supply: 20Vdc, 25mA

DON'T FORGET THE OTHER ACCESSORIES:

DIN rail, snap trak, power strips, wiring duct, surge protectors, terminal blocks, cabinets and more. NECC has all the accessories for you to build your panels or we can design, wire and fabricate the panel for you and create the corresponding wiring diagrams.

Schneider Electric DuraDrive™ Proportional Spring/Non-Spring Ret

TAC DuraDriveovershaft electric actuators are designed to provide an economical and reliable solution for many overshaft damper and ball valve requirements. All products accommodate shaft sizes up to 1/2" in diameter.

Features:

  • Control function direct/reverse action is jumper selectable
  • Overload protection throughout stroke
  • Automatically adjust the input span to match the damper/valve travel
  • Compact size to allow installation in limited space
  • Manual override to allow positioning of dampers and valves
  • Directly mounts to 1/2" to 3" ball valves
  • Polymer housing rated for plenum use

DON'T FORGET THE OTHER ACCESSORIES:

DIN rail, snap trak, power strips, wiring duct, surge protectors, terminal blocks, cabinets and more. NECC has all the accessories for you to build your panels or we can design, wire and fabricate the panel for you and create the corresponding wiring diagrams.

Part # Power/ VAC Torque in-lbs Feedback Input Spring Return  
MS4D-6043-100 24 35 2-10Vdc 2-10Vdc No Call... Add to Order
MS4D-6043-150 24 35 0-10Vdc 0-10Vdc No Call... Add to Order
MS4D-6083-100 24 70 2-10Vdc 2-10Vdc No Call... Add to Order
MS4D-6083-150 24 70 0-10Vdc 0-10Vdc No Call... Add to Order

Barber Colman/Schneider Electric Floating or Proportional Electric Actuators

For floating or proportional control of dampers, valves and program switches in heating, ventilating and similar applications.

Part # Signal Power  
CP-8301-240 1-15 Vdc (Series 8000) 240 VAC Call... Add to Order

Barber Colman/Schneider Electric High Torque Electric Actuators (800 to 1600 in-lbs)

For control of heavy dampers, large valves, inlet valves, vortex dampers and other high torque applications in heating, ventilating, air conditioning and similar applications where return to a normal position is not required.

Signal: SPDT, Floating or Proportional

Schneider Electric Electronic Non-Spring Return Valve Actuators

The VF and VS Series Valve and Modulating Actuator Assemblies consist of a non-spring return actuator mounted on a 1/2'' to 1.25'' two-way or three-way body. They accept floating or proportional control, respectively, from a DDC system or modulating thermostat for control of hot water, chilled water and steam coils.

Typical applications include reheat on VAV boxes, fan coil units, unit ventilators, and hot and chilled water coils in air handling units.

Features:

  • 0–10Vdc/2-10Vdc (field selectable) or 2-position/tri-state inputs
  • For hot water chilled water or steam systems
  • Integral linkage for all standard 1/2'' to 1.25'' 2-way and 3-way Barber-Colman valve bodies
  • Manual override with automatic release

Specifications:

  • Media Temperature: 40°–280°F @20 psi steam
  • Ambient Temperature: 40°–115°F
  • Flow Type: 2-way equal percentage 3-way linear mixing
  • Body Rating: 250 psi
  • Valve: Brass body, seat, plug S.S. stem
  • Power Supply: 24Vac
  • Timing: 150 seconds

When automating—rely on NECC for a full assortment of devices, including transducers with 0–10Vdc and 0–20mA signal capability, actuators, sensors, etc.