Pneumatic Valve Actuators
Compact Zone Valves For Automation Or Pneumatic Systems
One valve style–three separate operators.
Honeywell now offers a compact line of 1/2'' and 3/4'' zone valves. Ideally suited for today’s electronic control systems.
Features:
- Electric models are switch selectable direct or reverse acting
- 0–10Vdc, floating or pneumatic control
- Actuator mounts by hand
- Low space requirements
- Microprocessor-based positioner
- Power: 24Vac
- Plenum rated
Two-way Straight Valves
These compact Diaphragm Control Valve Assemblies are designed:
- for the control of hot or chilled water, or low pressure steam
- to permit installation within a small enclosure
- to be used for exposed fin tube converters or cast iron radiators
| SPECIFICATIONS | |
|---|---|
| Flow | Equal Percentage |
| Maximum Pressure | 150psi: Hot Water 35psi: Steam |
| Connection | Inlet: FPT Outlet: MPT Union |
Two-way Angle Valves
| SPECIFICATIONS | |
|---|---|
| Flow | Equal Percentage |
| Maximum Pressure | 150psi: Hot Water 35psi: Steam |
| Connection | Inlet: FPT Outlet: MPT Union |
Oval Pneumatic Valve Actuator
For compact actuation of 1/2'' through 1-1/4'' Barber-Colman valves. Has 6 sq. in. diaphragm area. For new installations, the AV-400 linkage kit is required.
Pneumatic Actuators for Medium Valves
For Medium Duty (11 sq. in. diaphragm) pneumatic actuation of 1-1/2" to 2" Barber-Colman valves.
Pneumatic Actuators for Large Valves
For Larger Valves (50 sq. in. diaphragm) to actuate 2-1/2" to 6" pneumatic valves
b - Used on VB-9323-0-5-14,15,16 valve bodies only.
Heavy Duty Pneumatic Valve Actuators
For Higher Closeoff Needs (100 sq. in. diaphragm), this actuator will operate pneumatic valves from 2.5" to 6".
HONEYWELL PNEUMATIC VALVE REPAIR KITS
These replacement kits contain a completely assembled top and stem assembly, valve seat and all fittings necessary to connect either copper or plastic tubing. Only the existing valve body must be reused. Rebuilding can be done without removing the valve body from the line. Replacement top assemblies contain the metal top, fitting and diaphragm.
VP501, VP525, VP531 Valve Repair Parts
VP526, VP527 Valve Repair Parts
VP512 Repair Parts
Unit Ventilator Valve Assemblies
A normally open, single seated, straight through pneumatic valve used for proportional control of steam or hot water in unit ventilator applications.
Pneumatic Radiator Valve Assemblies
Normally open, single seated pneumatic radiator valve with straight through or angle body construction provides proportional control of two-pipe, hot water or steam systems.
Unit Ventilator Valve Assemblies
Normally open, single seated valve provides proportional control of steam or hot or cold water in terminal units.
Honeywell Pneumatic Valve Actuators
These pneumatic actuators operate V5011 and V5013 valve assemblies.
They provide proportional control of steam or hot and cold liquids in HVAC systems.
MP953 Replacement Diaphragms
Old style 5" diaphragms have a flat edge around the circumference while new style diaphragms have a beaded roll edge. They are not interchangeable.
Silicone diaphragms are used in operators requiring higher temperature ratings. They are interchangeable with neoprene diaphragms of the same style and size.
Johnson Valve Packing Kits
Johnson Valve Actuator Diaphragms
Powers Powermite & Powertop Repair Parts
Powers Powermite & Powertop Valves can be completely rebuilt quickly in the field. They have a spin-on replacement actuator & trim assembly which can be installed without removing the valve body from the line. By installing the new top and changing the disc, you virtually have a new valve with a minimum of trouble.
Series 656 Powermite Repair Parts
Series 658 Powertop Repair Parts
658-166 Diaphragm Kit
Each kit contains five (5) diaphragms, mounting screws to replace those lost or damaged, and TB235 replacement instructions. See table for ordering information.
