Belimo Actuators & Damper Accessories
Belimo Actuator, Non-Spring Return Direct Coupled
NECC carries the complete line of Belimo valves, actuators, controls and accessories. Belimo's Non-Spring Return Direct Coupled Actuators are available in a complete variety of torques and control signals. The direction of stroke and return is selectable: CW and CCW with manual override. The SR and MFT models all have 2-10Vdc feedback. One or two SPDT auxiliary switches can be ordered built-in or snapped on later.
MFT (Multi function technology) signals can be configured to meet your individual job specifications. They have adjustable start and span: Start-0.5 to 30Vdc; Span-2.5 to 32Vdc.
24Vac/dc models are shown. Other models are available in 100-240V power.
1SPDT aux switch
Note: 0-135ohm replaces Honeywell's series "90" motors
Belimo Spring Return Direct Coupled Actuators
Belimo's Spring Return Direct Coupled Actuators are available in a complete variety of torques and control signals. They are reversible CW and CCW with manual override. The SR and MFT models all have 2-10Vdc feedback. One or two SPDT auxiliary switches can be ordered built-in or snapped on later.
MFT (Multi function technology) signals can be configured to meet your individual job specifications. They have adjustable start and span: Start-0.5 to 30Vdc; Span-2.5 to 32Vdc.
24Vac/dc models are shown. For 120 or 240V, just replace the "24" in the model # with the voltage you want.
* With 20Vdc fixed output
Belimo Auxiliary Switches
Used to indicate when a desired damper position is reached or to interface controls for a specific sequence.
Belimo Input Rescaling Module
Designed to change non-standard voltage or current into a 2–10Vdc output. The module is jumper selectable to accept either voltage or current applications.
Belimo Pulse Width Modulation Interface
Converts a single pulse-width modulated input to an analog output. Four input clock rates are jumper selectable.
Specifications:
- Input Rates: Range 1 0.235–6.0 seconds, 0.0235 second increments
Range 2 0.196–5.0 seconds, 0.0196 second increments
Range 3 0.1–25.5 seconds, 0.0100 second increments
Range 4 0.59–2.93 seconds, 0.00092 second increments - Output: 2–10Vdc
Belimo Clamps Mounting brackets (damper)
K4-1 Jackshaft clamp for AF/NF series
IND-AF2 Damper position indicator for AF/NF series
Belimo Crankarm adapter kits
ZG-AF for AF/NF series
Belimo Linkage accessories
KH-AF Crankarm for AF/NF series
KH-AF-1 Jackshaft crankarm for AF/NF series
KH-AFV Bolt kit for AF/NF crankarms
KH6 Universal crankarm with 1/4'' slot
KH8 Universal crankarm with 21/64'' slot
KG8 90° ball joint for 5/16'' rod
ZG-DC1 3.5'' damper clip
ZG-DC2 6'' damper clip
Belimo Mounting brackets (damper)
ZG-100 3-way mounting bracket
ZG-101 Hor. or vert. mounting bracket
ZG-102 Multiple actuator mounting bracket
Belimo Mounting brackets (floor)
ZG-100 Hor. mounting bracket (SM/GM)
ZG-104 Vert. mounting bracket (SM/GM/AF/NF)
ZG-105 Vert. mounting bracket (NM)
Belimo Protective housings
ZS-100 Metal weather shield for SM/GM/AF/NF
ZS-150 Plastic weather shield for SM/GM/AF/NF
ZS-300 NEMA 4X housing for SM/GM/AF/NF
Belimo Rotation limiters
ZDB-AF2 for AF/NF series
Belimo Shaft adapters
AV10-18 9.5'' shaft extension
ZG-NMSA-1 3'' shaft adapter for NM series
ZG-LMSA 3'' shaft adapter for LM series
Belimo Electronic Ball Valve Actuators
Select the Ball Valve you want from the chart above and then pick the actuator that suits your control application. Built-in auxiliary switches available on request.
