Johnson Controls Pneumatic Actuators
Johnson Controls 1" Stroke Pneumatic Actuators For VAV and Small Terminal Units
The D-3031 Pneumatic Actuator is designed primarily for damper positioning on small terminal units. Models, furnished with 1 in. stroke, have two movable adjustment stops to facilitate adjusting the stroke in 1/8" increments.
Johnson Controls Pneumatic Damper Actuators Light Duty (4 sq. ft.)
The D-3062 Pneumatic Piston Damper Actuator is used to accurately position small dampers primarily on variable air volume (VAV) and terminal units. The actuator is also recommended for use on other air flow control dampers, in interior locations, with a maximum area of 4 sq. ft.
Stroke: 2"
Johnson Controls Pneumatic Damper Actuators Medium Duty (6.75 sq. ft.)
Medium and heavy duty models come complete with:
- universal mounting bracket
- blade pin extension
- blade arm
- bearing
- crankarm
- all fasteners for proportion/air dampers
Stroke: 6.5"
Johnson Controls Pneumatic Damper Actuators Standard Duty (16 sq. ft.)
The D-3153 Pneumatic Actuator is used primarily for operating ventilating dampers in response to the output signal of a pneumatic controller or transducer. This actuator is recognized for use on UL classified 555/555S smoke and combination fire/smoke dampers which have been tested and approved to a degradation temperature of 250˚F
Stroke: 3''
Johnson Controls Pneumatic Damper Actuators Heavy Duty
D-3240 Series Pneumatic Piston Actuators are multipurpose positioning devices used for operating inlet vanes on centrifugal fans and compressors. These actuators can also be used on other applications that require a large amount of positioning power from a single actuator such as large dampers.
Typical D-3240 Series Swivel Mounted Actuator
Stroke: 4''
Johnson Controls Pneumatic Actuator Parts
| REPLACEMENT CHART FOR OLD JOHNSON DAMPER ACTUATORS | |
|---|---|
| OLD # | NEW # |
| D-251-#2 | D-3062 |
| D-257-#2S | D-3031 |
| D-251-#3 | D-4074 |
| D-251-#4 | D-3153 |
| D-251-#5,6 | D-3246 |
| D-255 | D-4070 |
| D-3000 | D-3062 |
Johnson Controls Valve Packing Kits
| ORDERING INFORMATION | ||
|---|---|---|
| ORDER# | Series | Suffix |
| JVP999 | V-5210 | 3752,54,66; 3854; 3966,70,74; 4322,24,32,34,40 |
| V-5250 | 556, 568 | |
| V-5490 | 820 | |
| V-5840 | 144, 150, 434 | |
| JVP602 | V-5250 | 575,76,77,78,79,82,83,94,95,96,99 |
| V-5460 | 851,60,61,68,69 | |
| V-5840 | 454,55,57 | |
| JVP603 | V-5250 | 584, 700, 702 |
| V-5460 | 704, 708, 855, 864 | |
| V-5840 | 476, 477, 482, 483 | |
| JVP626 | V-5230 | 4413,14,15 |
| V-5410 | ALL | |
| V-5430 | 4413,14,15,18,19,20 | |
| JVP650 | V-5230 | 4402,08,09,10,12,16,17,18,19,20,21,22 |
| V-5430 | 4402,08,09,10,12,16,17,21,22 | |
| JVP682 | V-5250 | 587,90,91; 704,06 |
| V-5460 | 720,24,52,60,84,88; 870 | |
| V-5840 | 478,79,80,84,85,86 | |
Johnson Controls Valve Actuator Diaphragms
| ORDERING INFORMATION | ||
|---|---|---|
| ORDER # | TYPE | SIZE |
| JVD600 | V-3000-1; V-3752,66; V-3966,70,74; V-4322,24,32,34; V-4440; V-5230-4408,09,10,16,17; JVD631 V-5430-4402,08,09,10,16,17,21 |
4-1/2'' |
| JVD601 | V-3000-2 | 3-1/2'' |
| JVD631 | (3R) V-5230, V-5840 | 6'' |
| JVD602 | (4R) V-5230, V-5430, V-5460, V-5650, V-5840 | 8'' |
| JVD603 | (5R) V-5230, V-5430, V-5460, V-5650, V-5840 | 10'' |
| JVD604 | (8R) V-5210, V-5230, V-5410, V-5460, V-5650, V-5840 | 16'' |
| JVD611 | V-3854 | 3-1/4'' Oval |
