Digital Pressure Meter
Digital Pneumatic Calibration Meter
Now you can have a solid state, digital pressure gauge with the specific range (0-30 psi) needed to set up, calibrate and troubleshoot pneumatic HVAC controls.
You can now get an accurate digital readout for any positive, negative or differential pressure in your plant or building. This new instrument will measure any non-corrosive liquid or gas.
Get laboratory accuracy (±0.5% of full scale) with the divisions (to .10 PSI) needed to make the precise calibrations demanded by today’s Energy Management and Automation Systems.
- Large, Easy To Read 1/2'' LCD Display
- Housed in a solid aluminum case
- Up to 500 hours on one battery (9V included.)
- No set-up or leveling needed
This kit comes complete with a tough grey, nylon carrying pouch which includes a convenient side compartment for tubing and other accessories. With belt loop, hand strap and adjustable shoulder strap.
- Pneumatic air mains & branches
- Automation transducers (I-P, P-I)
WHEN USED WITH THE BLB101:
|CONNECTIONS||1/4'' or 3/8'' OD barb|
|MINOR DIV.||0.10 psi|
|SENSOR||Solid State silicon piezoresistive|
|ACCURACY||±0.5% of full scale|
- Manual Leak Testing
- Signal Simulation
- Manual Positioning
1. Digital Pressure Gauge
2. Nylon Carrying Pouch
3. Pressure Simulating Bulb
4. 1/4'' Barb Tee
5. 1/4'' Rubber Tubing
6. 1/4'' Barb Connector
7. Pneumatic Calibration Chart