Barber Colman/Schneider Electric Pneumatic Valves
Barber Colman/Schneider Electric Two-way Straight Valves
These compact Diaphragm Control Valve Assemblies are designed:
- for the control of hot or chilled water, or low pressure steam
- to permit installation within a small enclosure
- to be used for exposed fin tube converters or cast iron radiators
SPECIFICATIONS | |
---|---|
Flow | Equal Percentage |
Maximum Pressure | 150psi: Hot Water 35psi: Steam |
Connection | Inlet: FPT Outlet: MPT Union |
Barber Colman/Schneider Electric Two-way Angle Valves
SPECIFICATIONS | |
---|---|
Flow | Equal Percentage |
Maximum Pressure | 150psi: Hot Water 35psi: Steam |
Connection | Inlet: FPT Outlet: MPT Union |
Barber Colman/Schneider Electric Oval Pneumatic Valve Actuator
For compact actuation of 1/2'' through 1-1/4'' Barber-Colman valves. Has 6 sq. in. diaphragm area. For new installations, the AV-400 linkage kit is required.
Barber Colman/Schneider Electric Pneumatic Actuators for Medium Valves
For Medium Duty (11 sq. in. diaphragm) pneumatic actuation of 1-1/2" to 2" Barber-Colman valves.
Barber Colman/Schneider Electric Pneumatic Actuators for Large Valves
For Larger Valves (50 sq. in. diaphragm) to actuate 2-1/2" to 6" pneumatic valves
b - Used on VB-9323-0-5-14,15,16 valve bodies only.
Barber Colman/Schneider Electric Heavy Duty Pneumatic Valve Actuators
For Higher Closeoff Needs (100 sq. in. diaphragm), this actuator will operate pneumatic valves from 2.5" to 6".