Honeywell now offers a compact line of 1/2'' and 3/4'' zone valves. Ideally suited for today’s control systems.
V5863A1006 and V5863A1014 For use with M6410 and M7410 actuators only
Single seated, straight through pneumatic valves used for proportional control of unit air conditioners using hot and/or chilled water.
Normally open, single seated, high pressure valves provide proportional control of hit and/or cold water in unit air conditioners and fan coil units.
Three-way pneumatic mixing valves provide proportional control of hot and/or cold water in unit air conditioner and fan coil systems.
Note: All connections on this page are 45°SAE Flare
Order all your Compressor Supplies from NECC. Look under: PNEUMATIC ACCESSORIES
NOR'EAST Controls, Inc., formerly Dezurik and Honeywell’s Industrial Division has over sixty years experience making specialty valves for process, high pressure and temperature, central utility plant, and large HVAC applications.
The valves shown here are the most popular models. For other body styles and functions, call NECC’s Engineering Department with your application, specifications or old valve number.
We can also supply a complete assortment of repair parts for
your commercial and industrial valves.
Highly accurate control with high rangeability. For low, medium, and high pressure use in oil refineries, petro-chemical and process industries, steel mills and pilot plants.
For larger volume, low and medium pressure applications where tighter Class IV shut off is required. A general purpose valve popular in textiles, chemicals, steel and HVAC systems.
For mixing two fluid lines or diverting a line to two outlets. Used in oil refineries, petro-chemical, chemical, steel, HVAC and heat exchange systems.
For low, medium and high pressure systems in oil refineries, petrochemical, chemical, pulp and paper, and steel.
These replacement kits contain a completely assembled top and stem assembly, valve seat and all fittings necessary to connect either copper or plastic tubing. Only the existing valve body must be reused. Rebuilding can be done without removing the valve body from the line. Replacement top assemblies contain the metal top, fitting and diaphragm.
A normally open, single seated, straight through pneumatic valve used for proportional control of steam or hot water in unit ventilator applications.
Normally open, single seated pneumatic radiator valve with straight through or angle body construction provides proportional control of two-pipe, hot water or steam systems.
Normally open, single seated valve provides proportional control of steam or hot or cold water in terminal units.
These pneumatic actuators operate V5011 and V5013 valve assemblies.
They provide proportional control of steam or hot and cold liquids in HVAC systems.
Old style 5" diaphragms have a flat edge around the circumference while new style diaphragms have a beaded roll edge. They are not interchangeable.
Silicone diaphragms are used in operators requiring higher temperature ratings. They are interchangeable with neoprene diaphragms of the same style and size.