Honeywell Electric Valves
Honeywell Fan Coil Valves with Snap-On Heads
The VU443, VU444, VU843 and VU844 valve actuators and VU52, VU53 and VU54 valve bodies will control hot or chilled water n commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors. These valves are humidity resistant and are suitable for use in condensing, non-corrosive environments. PLEAS NOTE: These valves are not for use in systems containing dissolved oxygen. The valves and operators are packaged separately. Just select the size and body you require and just snap the head and valve together—either before or after you seat the valve body in.
Installing the valve body is easier and quicker if the actuator is not attached. Simply press the quick release button to remove the head. Used for controlling fluids in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors.
Features:
- Spring return
- Stainless steel cover
- Hot water, chilled water, or 50% glycol
- Quick opening
- Manual opener
- Actuator removal without draining the system
- Humidity resistant
- Triple O-ring seal
* other Cv sizes available
Honeywell Universal Electronic Valve Operator
One Direct-Coupled Operator For All Electric/ Electronic Signals—No Extra Linkages Needed!
The ML6984, ML7984 are self-contained, self-adjusting, motorized actuator that mounts directly onto 1/2'' to 3'' threaded V5011 or V5013 valves. It’s ideal for replacing MP953 pneumatic actuators when automating.
Field Selectable Features:
- Electronic or Resistance (series 70 or 90) Control
- Direct/Reverse Actuation
- 24Vac/dc Power Supply
- SPDT End Switch
- Replaces All ML784 and ML984 Actuators
- Pulse Width Modulating
Stroke: 3/4"
Valve Closeoff Ratings | |
---|---|
Up to 1'' | 150# |
1-1/4'' | 145# |
1-1/2'' | 91# |
2'' | 47# |
2-1/2'' | 32# |
3'' | 19# |
Honeywell Direct Coupled Electric Valve Actuators
Upgrade To Automation Signal Compatibility!
Used for new construction, modernization or retrofit, these new higher torque models are designed for the 1/2'' to 6'' Honeywell V5011 and V5013 2-way or 3-way valves. The 3/4'' stroke models are for the 1/2'' to 3'' valves and the 1.5'' stroke models are used on the 4'' to 6'' valves. On the spring return models, spring return up and spring return down models are both available.
Features:
- Quick and easy installation
- No separate linkage required
- No adjustments required
- Accurate valve positioning
- High close-off ratings
- Force-limiting end switches
- Manual operator
* also provides 2-10vdc feedback signal
Power: 24Vac
Honeywell Morotized Zone Valves
Motorized zone valves are the most economical way of providing two-position control of hot or chilled water. Most brands are similar in flow and size.The valves below are Honeywell’s version. We also carry other brands: Erie, Bell & Gossett and Barber-Colman.
Honeywell 2-way Sweat and Flare Valves
For long life and low cost, motorized zone valves are your best value.
- 2-way Cv rating: 1/2'' = 3.5, 3/4'' = 8.0, 1'' = 8.0
- V8043F models have SPDT end switch
Honeywell 3-way Diverting Valves
Use for fan coil units, bypass service and other heating/cooling applications. These models are available in the most popular connections and sizes.
• 3-way Cv rating: 1/2'' = 4.0 3/4'' = 7.0
a - includes integral SPDT changeover aquastat
b - includes auxiliary end switch
Honeywell V5011 & V5013 Valve Repair Parts
For individual repair parts on Honeywell older or industrial valves, we will FAX you a parts breakdown so you can select the items you need.
* Items indicated with an asterisk are included in each kit.
Repairing a large quantity of valves?
Many individual parts shown in the repair kits are available separately in quantity packs (minimum of 25 each), such as packing, seats, disc, etc
Replacement Zone Valve Powerheads
Note: Other voltages, lead lengths and motor styles are available on order. Refer to your Tradeline Catalog or speak to our sales engineers.
Honeywell Zone and Fan Coil Valves With Twist-Lock Actuator
Convert To New Signal Options Without Major Piping Changes
These new style motorized valves are a compact alternative to the sweat zone valves normally used for light duty applications. They are available with new signal options for building automation—DDC floating and 0–10Vdc.
The body is a direct dimensional replacement for the older style V4043/V8043 series zone valves. For fan coil applications, 2- and 3-way flare is also available. Depending on the piping configurations, the 3-way valves can be used for either mixing or diverting service. Models shown include one meter connector cable.
Features:
- 3-way mixing and diverting
- 2-way bidirectional flow
- Easily replaceable seat cartridge
Specifications:
• Static pressure: | 300 psi |
• Flow characteristics: | Linear |
• Service: | Water, hot/chilled |
• Close off: | 60 psi |
* 240V models available Eggcrate packing available for construction.