Snap Track Relay Modules
Track Mount Multivoltage Relays
With Snap-Apart Modules
These relays are ideal for applications where local switching is needed for system status indication, load management, and general purpose switching. They are mounted on either space saving 3.25'' printed circuit boards or in enclosures. Some models have rear spacers for surface mounting.
The relays are mounted on either a 4 or 8 relay module. You can snap apart as many relays as you need for the moment. Each relay has a red “LED On” indicator which lights when the relay is energized. Each relay has multi-voltage input which reduces the stock you need.
10 Amp SPDT Multi-Volt Relays
These models are available with surface mount spacers or 3.25'' track mount versions. All can be powered by either 24Vac/dc or 115Vac.
10 Amp SPDT Multi-Volt Relays
With Built-In 10 Amp Fuse
Protect you devices with this handy relay. These models are available with surface mount spacers or 3.25'' track mount versions. They can be powered by either 24Vac or 24Vdc.
10 Amp SPDT Multi-Volt Relays
With “Auto-On-Off” Override Switch
The common power is bussed on the printed wiring board. This permits you to power all the relays from on e spot on the board. Manual override switch control is handy for testing or temporary shutoff service. 3.25'' mounting track included. Powered by 24Vac or 24Vdc.
NOTE: Contact ratings on all models listed on this page are resistive.
Track Mount Multivoltage Relays
With Snap-Apart Modules
DPDT, 10 Amp Relays
A Real Multi-Purpose, Multi-Voltage Relay!
Powered by 24Vac/dc, 115Vac or 230Vac. Enclosure or track-mount versions.
SPDT, 10 Amp Fused Relays
Protect The Contacts and Load From Over Current
Powered by 24Vdc. Enclosure or track-mount versions.
DPDT, 10 Amp Relays
With Built-In “Test Button”
Push-in test button enables you to momentarily close the relay contacts. Powered by 24Vac/dc or 115Vac. Enclosure or track-mount versions.