Johnson Controls Electric Valves
Johnson Controls Electric Control Valves
NECC is proud to introduce this new line of “Global Design” valves by Johnson Controls. These valves all conform to the International ISO 9002 Certification standards. The five electric actuators are all interchangeable, and the electric actuators can even be swapped out with any of the four pneumatic actuators!
The wide selection of valve styles make about 5,000 possible combinations of sizes, Cv’s and signals available right from stock.
Johnson Controls Two-way Electric Valves
* If your closeoff exceeds the number shown in the Standard Closeoff column, substitute a higher torque model by replacing the last five digits with the following: SPDT/Floating—“7200G”; SPDT/Floating with Feedback—“7203G”; 0–10Vdc—“7202G”
NORMALLY OPEN (Push Down to Close)
Johnson Controls Three-way Electric Valves
* If your closeoff exceeds the number shown in the Standard Closeoff column, substitute a higher torque model by replacing the last five digits with the following: SPDT/Floating—“7200G”; SPDT/Floating with Feedback—“7203G”; 0–10Vdc—“7202G”
PLANNING TO UPGRADE TO AUTOMATION?
NECC has the finest technical support to help you easily migrate to Digital (DDC) controls. We can help you with your project with engineering, wiring diagrams and panel fabrication.
– or –
If you need onsite help, we can come out and do a survey for you or recommend a local authorized contractor. Together, we can do it. Let us know how we can help you.
Johnson Controls Electric Ball Valves
For the Maximum Delivered CV at Competitive Prices, Johnson's line of motorized ball valves provide the highest quality components. The valve bodies are specifically designed as a control valve and not converted from a plumbing quality line of ball valves. The seats and seals are specifically resistant to cold water flow and abrasion.
Johnson Controls 1/2" Brass Flare Valves
2-way; 3-way; with floating, DDC or proportioning actuators. For small HVAC terminal units, fan coils, reheat coils, or perimeter radiation. For hot or chilled water. 35psi max pressure.
Johnson Controls 1/2" Flare 2-way, 3-way Valve Assemblies
Models shown are complete assemblies with brass flare valve bodies and a V3000 pneumatic actuator.
Johnson Controls V4332 3-way Mixing Valves are designed to regulate the mixing of water at different temperatures in small, room air conditioning units. This valve may be used in applications where hot water is circulated during the heating cycle and chilled water is circulated during the cooling cycle.
ORDERING INFORMATION | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
ELECTRIC VALVES | ||||||||||
VALVE BODIES | ACTUATORS | |||||||||
N.O. | N.C. | Cv | 3-Way Mix | Cv | Order # | Signal | ||||
VB-3766-1 | *** | 1 | VB-4332-4 | 1.2 | VA-8050-1 | 24Vac Floating | ||||
VB-3766-2 | VB-3966-1 | 1.7 | VB-4332-5 | 2 | VA-8051-1 | Float w/Feedback | ||||
VB-3766-3 | VB-3966-2 | 3.2 | *** | ** | VA-8052-1 | 010Vdc Prop | ||||
PNEUMATIC VALVES | ||||||||||
2Way | 3-Way | |||||||||
Order # | Cv | Type | Range | Order # | Cv | Range | ||||
V-3766-1001 | 1 | N.O. | 36# | V-4332-1007 | 1.2 | 48# | ||||
V-3766-1002 | 1.7 | V-4332-1009 | 2.0 | |||||||
V-3766-1003 | 3.2 | V-4332-1004 | 1.2 | 913# | ||||||
V-3966-1001 | 1.7 | N.C. | 913# | V-4332-1006 | 2.0 | |||||
V-3966-1002 | 3.2 |