Vulcain/Honeywell Analytics Gas Monitors
Explosion Proof Oxygen, Toxic & Combustible Gas Monitors
The Sensepoint XCD transmitter for commercial applications provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, indoors and outdoors — and is marked by installation ease and flexibility, user-friendly operation and cost-effective gas monitoring.
Three different types of the XCD transmitter are available for use with three different families of sensors. The mV type transmitter is for use with the mV family of XCD sensors including catalytic bead sensors to detect flammable gases in the range 0-100%LEL. The Electro Chemical (EC) type transmitter is for use with the EC family of XCD sensors including carbon monoxide (CO), hydrogen sulfide, (H2S), hydrogen (H2) and nitrogen dioxide (NO2). The oxygen transmitter is for use with the oxygen (O2) XCD sensors.
SENSEPOINT XCD SENSOR FAMILIES, GASES AND RANGES | |||||||
---|---|---|---|---|---|---|---|
Sensor Family | mV | Gas | User Selectable Full Scale Range | Default Range | Range Increments | Selectable Cal Gas Range | Default Cal Point |
Catalytic Bead Sensors | 30 to 70% of selected full scale range | ||||||
Flammable 1-8• | 20-100% LEL | 100% LEL | 10% LEL | 50% LEL | |||
Infrared Sensors | |||||||
Methane | 20-100% LEL | 100% LEL | 10% LEL | 50% LEL | |||
Propane | 20-100% LEL | 100% LEL | 10%LEL | 50% LEL | |||
Carbon Dioxide | 2%Vol. | 2% Vol. | 2% Vol. | 1% Vol. | |||
EC | Electrochemical Sensors | ||||||
Hydrogen Sulfide | 10-100 ppm | 50.0 ppm | 0.1ppm | 10 ppm | |||
Carbon Monoxide | 100-1,000 ppm | 300 ppm | 100 ppm | 100 ppm | |||
Hydrogen | 1,000 ppm only | 1,000 ppm | n/a | 500 ppm | |||
Nitrogen Dioxide | 10-50 ppm | 10 ppm | 5 ppm | 5 ppm | |||
O2 | Oxygen | 25% Vol. only | 25% Vol. | n/a | 20.9% Vol. (Fixed) | 20.9% Vol. |
Setra Room Condition Monitoring
Gas Detection Controller
Control and monitor for toxic and combustible gases and oxygen hazards locally or through a Building Automation System network while reducing cost of installation and ownership of a gas detection system.
User Friendly
- Zero Maintenance
- Automatic, quick self test and warm-up
- Continuous alphanumeric display
Inexpensive and reliable
- Lowers installation costs by using only two pairs of wires to connect up to 96 transmitters
- Allows for up to 126 zoning groups which can extend fan and relay life
- Manages up to 768 events with programming latching alarms
Flexible Operation
- Modbus compatible; with BACnet/IP and datalogging options
- Transmitters able to detect different gases
- Expands to handle up to 96 transmitters or relay modules
- Programmable time delays
- Integrated time clock enables scheduling of system operations
- Available in heavy duty Industrial enclosure
- Full array of visual indicators and integrated 65dBA alarm levels
ORDER # | DESCRIPTION |
---|---|
VA301C | Controller, Plastic Enclosure |
VA301C-DLC | Controller with Datalogger, Plastic Enclosure |
VA301C-DLC-BIP | Controller, Datalogger, BACnetI/P Output, Enclosure |
301C-DLC-W | Wireless Controller with Datalogger, Plastic Enclosure |
301C-DLC-BIP-W | Wireless Controller, Datalogger,BACnet/IP Output, Plastic |
AIRALERT-96D | Controller with Datalogger, Industrial Enclosure |
AIRALERT-96D-BIP | Controller, Datalogger,BACnet/IP Output, Industrial Encl. |
VA301R8 | Relay Module with 8 Relays |
301R8-W | Wireless Relay Module with 8 Relays |
301R8-W-F | Wireless Relay Module with 8 Failsafe Relays |
VA301AP | Annunciator Panel for VA301C |
VA301ADI |
Analog Digital Input Converter (4-20mA to Modbus RS-485) |
VA420I | Digital Output Analog Converter (Modbus RS-485 to 4-20mA) |
Refrigerant, Toxic & Combustible Gas Controller
The 301EM-20 acts as a controller for up to 20 remote sensors and suits a variety of gas detection system solutions for Mechanical rooms.
Particularly configured to meet ASHRAE 15, B-52 and International Mechanical Code requirements, the 301EM-20 is commonly used to optimize gas detection in mechanical and chiller rooms. A full complement of sensors (including toxic, oxygen, combustible gases and a full line of refrigerant sensors) horns, strobes and remote panels provide added flexibility to suit a variety of gas detection system solutions.
SENSOR TYPE |
Gases Detected | Detection Range | Infrared Refrigerant Gas Sensors | |||
---|---|---|---|---|---|---|
Refrigerant 301IRFS |
R11, R12, R22, R13B1, R123, R125, R134A, R227, R245A, R404A, R407C, R410A, R507A, R508B | 0-1000 ppm | Order # | Gas | Order # | Gas |
Explosion-Proof S301D2 |
Carbon Monoxide (CO) | 0-250 ppm | VA301IRFSR11 | R11 | VA301IRFSR245A | R245A |
Chlorine (Cl2) | 0-15 ppm | VA301IRFSR13B1 | R13B1 | VA301IRFSR404A | R404A | |
Nitrogen Dioxide (NO2) | 0-10 ppm | VA301IRFSR22 | R22 | VA301IRFSR407C | R407C | |
Hydrogen Sulfide (H2S) | 0-50 ppm | VA301IRFSR123 | R123 | VA301IRFSR410A | R410A | |
Sulfur Dioxide (SO2) | 0-10 ppm | VA301IRFSR125 | R125 | VA301IRFSR507A | R507A | |
Oxygen (O2) | 0-25% | VA301IRFSR134A | R134A | VA301IRFSR508B | R508B | |
VA301IRFSR227 | R227 | |||||
Combustibles | 0-100% LEL |
S301D2CL2 | C12 | S301D2CO | CO | |
S301D2H2S | H2S | S301D2NO2 | NO2 | |||
S301D2O2 | O2 | S301D2SO2 |
SO2 |
E3Point Toxic & Combustible Gas Monitor
The E3Point Gas Monitor is available in standalone, standalone with remote (dual gas mode) or network versions. It connects to any analog or digital system. It works with virtually any Building Automation System including BACnet and Modbus. This monitor connects to wired systems or a hybrid wired/wireless system (via 301CW wireless controller) Detects CO, NO2, O2, H2, H2S, CH4, & C3H8 with factory calibrated sensor cartridges.
MAIN UNIT -WALL MOUNT VERSION | |
---|---|
Stand-Alone, Single Gas Monitor | |
ORDER # | DESCRIPTION |
E3SASCO | E3Point with CO Sensor, 4-20mA, 24VAC/DC |
E3SA | E3Point without Sensor, 4-20 mA, 24VAC/DC |
E3SAHSCO | E3Point with CO Sensor, 4-20mA, 120VAC/DC |
E3SAH | E3Point without Sensor, 4-20 mA, 120VAC/DC |
Network, Single Gas Monitor | |
ORDER # | DESCRIPTION |
E3SBSCO | E3Point with CO Sensor, BACnet, 24VAC/DC |
E3SB | E3Point without Sensor, BACnet, 24VAC/DC |
E3SMSCO | E3Point with CO Sensor, Modbus, 24VAC/DC |
E3SM | E3Point without Sensor, Modbus, 24VAC/DC |
MAIN UNIT -DUCT MOUNT VERSION | |
---|---|
Stand-Alone, Single Gas Monitor | |
ORDER # | DESCRIPTION |
E3DASCO | E3Point with CO Sensor, 4-20mA, 24VAC/DC |
E3DA | E3Point without Sensor, 4-20 mA, 24VAC/DC |
Network, Single Gas Monitor | |
ORDER # | DESCRIPTION |
E3DMSCO | E3Point with CO Sensor, Modbus, 24VAC/DC |
E3DM | E3Point without Sensor, Modbus, 24VAC/DC |
Gas Sensors and Cartridges are required when ordering the E3Point Monitor. When ordering, specify which gases will be monitored and our sales technicians will select the correct sensor. Available sensors are; Carbon Monoxide (CO), Nitrogen Dioxide (NO2), Hydrogen Sulfide (H2S), Hydrogen (H2), Oxygen (O2), Methane (CH4), Propane (C3H8).